We will start the year out with an organizer!

Join us for this easy-to-make craft project! You must be familiar with topstitching, "birthing the bag" and other techniques.

Register now to receive invites from WebEx. http://bit.ly/2Leanfw

DESIGN NOTES:

The same material can be used for the entire project or use an assortment of colors and prints for a more creative look.

If you are using a one-way print for the pocket pieces, then three (3) should be cut in a horizontal direction, and three (3) should be cut in a vertical direction.

Decorative stitches, binding, or other embellishments can be used on the outer edges of the pockets.

TIP: If adding binding, you will only attach it to one (1) of the edges, so that means six (6) strips, 12.5-inches each. Additional binding, approximately 6.5 feet, will be needed for the outer edges.

A matching drawstring bag may be created using a separate pattern; a bag will help keep needles in place when transporting the rolled-up organizer.

FABRIC:

Straight needles & crochet hook pockets: Three (3) pieces, 12.5”x12.5” each

Circular needle pockets: Three (3) pieces, 12.5”x12.5” each

Liner: One (1) piece 12.5”x12.5” and one (1) piece 12.5”x8.5”

Ties: Two (2) pieces 12.5”x2”

Outer cover: One (1) piece 12.5”x20.5”

OPTIONAL ZIPPERED POUCH or Store-bought zippered pouch case with three-ring punch grommets

Three (3) pieces of ribbon, 12.5” each